Description This non-slip adhesive floor & stair protection has a liquid-tight top layer and a self-adhesive bottom. This floor protection is suitable for all hard and smooth floors such as: laminate, PVC, tiles, synthetic floors and stairs. Ideal for painting, plastering, moving and (re)building. This self-adhesive floor & stair protector is suitable for dry surfaces. The substrate must be dust-free, smooth, clean and free from chemicals. The cover fleece provides protection against dirt, moisture, rolling stock and falling tools. The processing temperature is between 5 and 40°C. Runs must be laid with an overlap of approximately 10 cm. Pre-testing is always recommended. This self-adhesive stair & floor protector is the highest quality, with properties such as liquid-tight, shock-absorbing, reusable and self-adhesion. Due to the latter, the use of tape is no longer necessary. Finally, the product is made from recycled polyester fleece with an extra PE top layer. Please note: not suitable for floors that have recently been laid, porous stone floors, natural stone floors, clay tiles and recently laid concrete. In addition, the product can be used for a maximum of 3 months. The underfloor heating must also be switched off. Adhesive Floor & Stair Protection is available in: 16.25sqm and 25sqm Width: ± 65cm or 100cm Grams: 160 grams per m² Coated: PE film on the top Waterproof: Yes Absorbent: No Breathable: No Self adhesive: Yes
